| Name | Length, mm | Width, mm | Height, mm | LED lifetime, h | Output, lm | Power, W | Efficacy, lm/W | CRI (Ra) | CCT, K | Weight, kg | UGR index |
| Decor O LED1x3850 K202 T840 L75 LO1 | 1148 | 59 | 69 | 100000/L80B10 | 3804 | 21.7 | 175 | 80+ | 4000 | 2.3 | ≤16 |
| Decor O LED1x5350 K203 T840 L75 LO2 | 1148 | 59 | 69 | 100000/L80B10 | 5317 | 31.7 | 168 | 80+ | 4000 | 2.3 | ≤19 |
| Decor O LED1x5500 K204 T840 L75 LO3 | 1148 | 59 | 69 | 100000/L80B10 | 5492 | 29.8 | 184 | 80+ | 4000 | 2.3 | ≤19 |
| Decor O LED1x6600 K205 T840 L75 LO4 | 1148 | 59 | 69 | 100000/L80B10 | 6556 | 35.7 | 184 | 80+ | 4000 | 2.3 | ≤19 |
| Decor O LED1x7600 K206 T840 L75 LO5 | 1148 | 59 | 69 | 100000/L80B10 | 7560 | 41.5 | 182 | 80+ | 4000 | 2.3 | ≤19 |
| Decor O LED1x4800 K207 T840 L75 LO1 | 1428 | 59 | 69 | 100000/L80B10 | 4755 | 27.4 | 174 | 80+ | 4000 | 2.6 | ≤16 |
| Decor O LED1x6650 K208 T840 L75 LO2 | 1428 | 59 | 69 | 100000/L80B10 | 6647 | 38.8 | 171 | 80+ | 4000 | 2.6 | ≤19 |
| Decor O LED1x6900 K209 T840 L75 LO3 | 1428 | 59 | 69 | 100000/L80B10 | 6864 | 36.5 | 188 | 80+ | 4000 | 2.6 | ≤19 |
| Decor O LED1x8200 K210 T840 L75 LO4 | 1428 | 59 | 69 | 100000/L80B10 | 8195 | 44.1 | 186 | 80+ | 4000 | 2.6 | ≤19 |
| Decor O LED1x9450 K211 T840 L75 LO5 | 1428 | 59 | 69 | 100000/L80B10 | 9450 | 51.3 | 184 | 80+ | 4000 | 2.6 | ≤19 |
| Decor O LED1x9550 K212 T840 L75 LO1 | 2831 | 59 | 69 | 100000/L80B10 | 9510 | 51.4 | 185 | 80+ | 4000 | 5.0 | ≤16 |
| Decor O LED1x13300 K213 T840 L75 LO2 | 2831 | 59 | 69 | 100000/L80B10 | 13294 | 75.1 | 177 | 80+ | 4000 | 5.0 | ≤19 |
| Decor O LED1x13750 K214 T840 L75 LO3 | 2831 | 59 | 69 | 100000/L80B10 | 13729 | 72.1 | 190 | 80+ | 4000 | 5.0 | ≤19 |
| Decor O LED1x16400 K215 T840 L75 LO4 | 2831 | 59 | 69 | 100000/L80B10 | 16390 | 86.4 | 190 | 80+ | 4000 | 5.0 | ≤19 |
| Decor O LED1x18950 K216 T840 L75 LO5 | 2831 | 59 | 69 | 100000/L80B10 | 18901 | 101.6 | 186 | 80+ | 4000 | 5.0 | ≤19 |
Available options:
T830 – Colour temperature 3000K, CRI 80+
T840 – Colour temperature 4000K, CRI 80+
L30 – Optics with 30° beam angle
L40x75 – Optics with 40×75° beam angle
L75W – Optics with 75° beam angle, wide
L75 – Optics with 75° beam angle
L90W – Optics with 90° beam angle, wide
L100 – Optics with 100° beam angle, diffused
L2A25 – Optics with double asymmetric beam
L1A18-L – Optics with asymmetric beam, light direction – left
L1A18-R – Optics with asymmetric beam, light direction – right
DALI – Driver with DALI interface and switch-control dimming
*note – for DALI LIN option wires are 2×0.5 mm²
EAIRB-M – Integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control
*note – ingress protection IP20
*note – EAIRB sensor is positioned in the end of the luminaire for lengths up to 1800 mm luminaire housing is 72 mm longer
*note – EAIRB sensor is positioned in the middle of the luminaire for lengths over 1800 mm luminaire housing is 70 mm longer
EAIRB-S – Slave luminaire with integrated EAIR type driver for lighting control
*note – max system size 1x EAIRB-M + 3x EAIRB-S
*note – max wire length from EAIRB-M to last EAIRB-S – 11 meters
BLT – Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth), with integrated DALI PS
KRBLT – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), on/off
KRBLT DALI – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), DALI with integrated PS
COR – Driver with Corridor function (never off)
COR1min – Driver with Corridor function 1 min (switch off after 1 min)
COR30min – Driver with Corridor function 30 min (switch off after 30 min)
PULL – Pull switch device, on/off
PULLDIM – Pull switch device and driver with switch-control dimming
*note – For PULL and PULLDIM option luminaire housing is 50 mm longer and switch is positioned at the end of luminaire
MW – Integrated microwave (MW) motion sensor with on-off control
*note – MW sensor is positioned in the end of the luminaire for lengths up to 1800 mm luminaire housing is 72 mm longer
*note – MW sensor is positioned in the middle of the luminaire for lengths over 1800 mm luminaire housing is 70 mm longer
PIR – Integrated PIR sensor with on-off control
PIR DALI – Integrated PIR sensor with power supply and DALI driver
PIR BLT DALI – Integrated wireless PIR sensor with CASAMBI app control and DALI driver. Requires DALI power supply in the system
PIR KRBLT DALI – Integrated wireless PIR sensor with power supply and DALI driver for KR system controls
*note – PIR sensor is positioned in the end of the luminaire for lengths up to 1800 mm luminaire housing is 72 mm longer
*note – PIR sensor is positioned in the middle of the luminaire for lengths over 1800 mm luminaire housing is 70 mm longer
EM3 – Emergency version 3 hours
EM3A – Emergency version equipped with an autonomous testing system, 3 hours
EM3D – Emergency version 3 hours with DALI interface
*note – EM options applicable for models longer than 1000 mm
*note – EM+PIR +DALI+LL options are not applicable for models: K202…K206
*note – ask for EM+PIR+DALI+L options compatibility with models: K202…K206
1LIN – Through wiring single phase d=1.5 mm² with two push-in terminal blocks
2LIN – Through wiring two phases d=1.5 mm² with two push-in terminal blocks
3LIN –Through wiring three phases d=1.5 mm² with two push-in terminal blocks
CBF3-2.0m – Outgoing flexible cable 3×0.75 mm² 2.0 m
L – for in-line connection end/first luminaire (lengths: 1140/ 1420/ 2823 mm)
LL – for in-line connection intermediate luminaire (lengths: 1131/ 1411/ 2814 mm)
I-join L – Luminaire designed to in-line connection with join element – end/first luminaire (joint element not included)
I-join LL – Luminaire designed to in-line connection with join element – intermediate luminaire (joint element not included)
L I-join LL – Luminaire designed for in-line connection with join element and intermediate luminaire (joint element not included)
*note – for L and LL models joint kit not included and 1LIN option included (5TB option for lengths up to 800 mm)
SUS – Suspended version
*note – for suspended luminaires it is recommended to use one of CBF3 option for easier mounting
RAL – RAL colour
Accessories:
CAP cable 3×0.75 2.0m clear – Cable 3×0.75 mm² for suspended luminaire up to 2.0 meters, transparent
CAP cable clip D6.3mm SET clear – Cable and suspension wire clip set, 4 pcs. For cable diameter up to 6,3 mm and wire diameter 1 mm
Suspension MTG KIT SUSI – Suspension wire set “I” type, 1.5 m adjustable, 1 pcs
*note – 2 pcs MTG SUSI KIT for length up to 2000 mm, 3 pcs MTG SUSI KIT for lengths 2000 – 3000 mm
*note – SUS option is required
CAP4, white/ light grey/ black – Square decorative metal cap for hiding cable inlet with suspension wire attachment point, push-in terminals 3x1x1.5 mm², white/ light grey/ black
CAP5, white/ light grey/ black – Square decorative metal cap for hiding cable inlet with suspension wire attachment point, push-in terminals 5x1x1.5 mm², white/ light grey/ black
I-JOIN MTG KIT Decor LED RAL9006S – “I” type join kit for connecting luminaires in-line
*note – check RAL colour to match luminaire
*note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position
L-JOIN MTG KIT Decor LED RAL9006S – “L” type join kit for connecting luminaires in-line
*note – check RAL colour to match luminaire
*note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position
T-JOIN MTG KIT Decor LED RAL9006S – “T” type join kit for connecting luminaires in-line
*note – check RAL colour to match luminaire
*note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position
X-JOIN MTG KIT Decor LED RAL9006S – “X” type join kit for connecting luminaires in-line
*note – check RAL colour to match luminaire
*note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position
