| Name | Length, mm | Width, mm | Height, mm | LED lifetime, h | Output, lm | Power, W | Efficacy, lm/W | CRI (Ra) | CCT, K | Weight, kg | UGR index |
| DECOR LO LED1x3850/1800 K217 T840 L75 LG3 LO1 | 1148 | 59 | 80 | 100000/L80B10 | 5571 | 37.6 | 148 | 80+ | 4000 | 2.7 | ≤16 |
| DECOR LO LED1x5350/2450 K218 T840 L75 LG3 LO2 | 1148 | 59 | 80 | 100000/L80B10 | 7746 | 53.3 | 145 | 80+ | 4000 | 2.7 | ≤16 |
| DECOR LO LED1x4800/2150 K219 T840 L75 LG3 LO1 | 1428 | 59 | 80 | 100000/L80B10 | 6875 | 44.7 | 154 | 80+ | 4000 | 3.2 | ≤16 |
| DECOR LO LED1x6650/2950 K220 T840 L75 LG3 LO2 | 1428 | 59 | 80 | 100000/L80B10 | 9562 | 64.7 | 148 | 80+ | 4000 | 3.2 | ≤16 |
| DECOR LO LED1x9550/4250 K221 T840 L75 LG3 LO1 | 2831 | 59 | 80 | 100000/L80B10 | 13751 | 87.4 | 157 | 80+ | 4000 | 6.6 | ≤16 |
| DECOR LO LED1x13300/5850 K222 T840 L75 LG3 LO2 | 2831 | 59 | 80 | 100000/L80B10 | 19124 | 126.7 | 151 | 80+ | 4000 | 6.6 | ≤16 |
Available options:
T830 – Colour temperature 3000K, CRI 80+
T840 – Colour temperature 4000K, CRI 80+
L30 – Optics with 30° beam angle
L40x75 – Optics with 40×75° beam angle
L75W – Optics with 75° beam angle, wide
L75 – Optics with 75° beam angle
L90W – Optics with 90° beam angle, wide
L100 – Optics with 100° beam angle, diffused
L2A25 – Optics with double asymmetric beam
L1A18-L – Optics with asymmetric beam, light direction – left
L1A18-R – Optics with asymmetric beam, light direction – right
DALI – Driver with DALI interface and switch-control dimming
*note – for DALI LIN option wires are 2×0.5 mm²
DALIsep – Driver with DALI interface and with possibility to control down and up light separately
*note – for DALI LIN option wires are 2×0.5 mm²
EAIRB-M – Integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control
*note – ingress protection IP20
*note – for option EAIRB luminaire housing is 72 mm longer
*note – the EAIRB sensor are positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
EAIRB-S – Slave luminaire with integrated EAIR type driver for lighting control
*note – max system size 1x EAIRB-M + 3x EAIRB-S
*note – max wire length from EAIRB-M to last EAIRB-S – 11 m
*note – please ask for special models with options EAIRB
BLT – Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth), with integrated DALI PS
KRBLT – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), on/off
KRBLT DALI – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), DALI with integrated PS
PULL – Pull switch device, on/off
PULLDIM – Pull switch device and driver with switch-control dimming
*note – for PULL and PULLDIM option luminaire housing is 50 mm longer and switch is positioned at the end of luminaire
Lsep – Option that enables to control (on/off) Down and up lights separately
MW – Integrated microwave (MW) motion sensor with on-off control
*note – for option MW luminaire housing is 72 mm longer
*note – MW sensor is positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
PIR – Integrated PIR sensor with on-off control
PIR DALI – Integrated PIR sensor with power supply and DALI driver
PIR BLT DALI – Integrated wireless PIR sensor with CASAMBI app control and DALI driver. Requires DALI power supply in the system
PIR KRBLT DALI – Integrated wireless PIR sensor with power supply and DALI driver for KR system controls
*note – for option PIR luminaire housing is 72 mm longer
*note – PIR sensor is positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
*note – ingress protection IP40
EM3 – Emergency version 3 hours
EM3A – Emergency version equipped with an autonomous testing system, 3 hours
EM3D – Emergency version 3 hours with DALI interface
*note – when emergency mode is active, only DOWN part is illuminated
*note – PIR+EM+DALI+L and LL options are applicable for models longer than 1200mm
1LIN – Through wiring single phase d=1.5 mm² with two push-in terminal blocks
2LIN – Through wiring two phases d=1.5 mm² with two push-in terminal blocks
3LIN – Through wiring three phases d=1.5 mm² with two push-in terminal blocks
CBF3-2.0m clear – Cable 3×0.75 mm² for suspended luminaire up to 2.0 meters, transparent
CBF3-3.0m clear – Cable 3×0.75 mm² for suspended luminaire up to 3.0 meters, transparent
CBF5-2.0m clear – Cable 5×0.75 mm² for suspended luminaire up to 2.0 meters, transparent
CBF5-3.0m clear – Cable 5×0.75 mm² for suspended luminaire up to 3.0 meters, transparent
*note – for suspended luminaires it is recommended to use one of CBF option for easier mounting
L – for in-line connection end/first luminaire
LL – for in-line connection intermediate luminaire
RAL9006S – RAL 9006S colour
RAL9005S – RAL 9005S colour
RAL – RAL colour
Accessories:
CAP cable 3×0.75 2.0m clear – Cable 3×0.75 mm² for suspended luminaire up to 2.0 meters, transparent
CAP cable clip D6.3mm SET clear – Cable and suspension wire clip set, 4 pcs. For cable diameter up to 6,3 mm and wire diameter 1 mm
Suspension MTG KIT SUSI – Suspension wire set “I” type, 1.5 m adjustable, 1 pcs
*note – 2 pcs MTG KIT SUSI for length up to 2000 mm, 3 pcs – for lengths 2000 – 3000 mm
CAP4, white/ light grey/ black – Square decorative metal cap for hiding cable inlet with suspension wire attachment point, push-in terminals 3x1x1.5 mm², white/ light grey/ black
CAP5, white/ light grey/ black – Square decorative metal cap for hiding cable inlet with suspension wire attachment point, push-in terminals 5x1x1.5 mm², white/ light grey/ black
WALL MTG KIT – Decor L/LP LED RAL9006S – Support bracket for luminaire installation onto wall. Decor L/LP LED, 1 pcs
*note – 2 pcs WALL MTG KIT – elements for length up to 2000 mm, 3 pcs for lengths 2000 – 3000 mm required