Serpens S LED IK05 IP40 UGR

Available options:
T830 – Colour temperature 3000K, CRI 80+
T840 – Colour temperature 4000K, CRI 80+
DALI – Driver with DALI interface and switch-control dimming
          *note – DALI option is not applicable for models: K260, K264, H394, H398
          *note – for DALI LIN option wires are 2×0.5 mm²
EAIRB-M – Master luminaire with integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control
          *note – ingress protection IP20
          *note – For option EAIRB luminaire housing is 72 mm longer
          *note – For option EAIRB luminaire housing is 84 mm longer for models longer than 1800 mm
          *note – the EAIRB sensor are positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
EAIRB-S – Slave luminaire with integrated EAIR type driver for lighting control
          *note – max system size 1x EAIRB-M + 3x EAIRB-S
          *note – max wire length from EAIRB-M to last EAIRB-S – 11 meters
          *note – EAIRB option is not applicable for models: K223…K228, K231, K235, K238, K242, K264, H357…H362, H365, H369, H372, H376, H398
BLT – Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth), with integrated DALI PS
PULL – Pull switch device, on/off
PULLDIM – Pull switch device and driver with switch-control dimming
          *note – For PULL and PULLDIM option luminaire housing is 50 mm longer and switch is positioned at the end of luminaire
MW – Integrated microwave (MW) motion sensor with on-off control
          *note – For option MW luminaire housing is 105 mm longer
          *note – For option MW luminaire housing is 117 mm longer for models longer than 1800 mm
PIR – Integrated PIR sensor with on-off control
          *note – ingress protection IP40
PIR BLT DALI – Integrated wireless PIR sensor with CASAMBI app control and DALI driver. Requires DALI power supply in the system
          *note – For PIR options luminaire housing is 72 mm longer
          *note – For option PIR luminaire housing is 84 mm longer for models longer than 1800 mm
          *note – PIR option is not applicable for models: K223…K226, H357…H360
EM3 – Emergency version 3 hours
EM3A – Emergency version equipped with an autonomous testing system, 3 hours
EM3D – Emergency version 3 hours with DALI interface
          *note – EM options applicable for models longer than 1100 mm
          *note – ask for EM option compatibility with models K238…K241, H372…H375
1LIN – Through wiring single phase d=1.5 mm² with two push-in terminal blocks
2LIN – Through wiring two phases d=1.5 mm² with two push-in terminal blocks
3LIN – Through wiring three phases d=1.5 mm² with two push-in terminal blocks
          *note – LIN options applicable for models longer than 800 mm, for shorter models 5TB option
5TB – 5-pole terminal block in middle of luminaire for easy through wiring
          *note – 5TB terminal block included as standard
SB – Support brackets for installation into a plasterboard ceiling
          *note SB option included
CBF3-2.0m – Outgoing flexible cable 3×0.75 mm² 2.0 m
CBF5-2.0m – Outgoing flexible cable 5×0.75 mm² 2.0 m
L – For in-line connection end/first luminaire
LL – For in-line connection intermediate luminaire
          *note – for L and LL models joint kit and 1LIN option included (5TB option for lengths up to 800 mm)
IP44 – IP44 protection degree
          *note – IP44 option not applicable for L and LL models
RAL9006S – RAL 9006S colour
RAL9005S – RAL 9005S colour
RAL – RAL colour