Serpens P LED IK05 IP40 UGR

Available options:
T830 – Colour temperature 3000K, CRI 80+
T840 – Colour temperature 4000K, CRI 80+
WMC – White matt reflector with clear lens
BMC – Black matt reflector with clear lens
MGC – Metallic mirror finish reflector with clear lens
MMC – Metallic matt reflector with clear lens
WAC – Metallic mirror finish asymmetrical reflector with white shade and clear lens
BAC – Metallic mirror finish asymmetrical reflector with black shade and clear lens
WAC-L – Metallic mirror finish asymmetrical reflector with white shade and clear lens – left
WAC-R – Metallic mirror finish asymmetrical reflector with white shade and clear lens – right
BAC-L – Metallic mirror finish asymmetrical reflector with black shade and clear lens – left
BAC-R – Metallic mirror finish asymmetrical reflector with black shade and clear lens – right
          *note – module quantities per model: K321…K324 – 4; K325…K328 – 5; K329…K332 – 8; K333…K336 – 10
DALI – Driver with DALI interface and switch-control dimming
          *note – for DALI LIN option wires are 2×0.5 mm²
EAIRB-M – Integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control
          *note – ingress protection IP20
          *note – for option EAIRB luminaire housing is 72 mm longer
          *note – the EAIRB sensor is positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
          *note – EAIRB option is not applicable for model: K328
EAIRB-S – Slave luminaire with integrated EAIR type driver for lighting control
          *note – max system size 1x EAIRB-M + 3x EAIRB-S
          *note – max wire length from EAIRB-M to last EAIRB-S – 11 meters
BLT – Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth), with integrated DALI PS
KRBLT – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), on/off
KRBLT DALI – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), DALI with integrated PS
PULL – Pull switch device, on/off
PULLDIM – Pull switch device and driver with switch-control dimming
          *note – For PULL and PULLDIM option luminaire housing is 50 mm longer and switch is positioned at the end of luminaire
MW – Integrated microwave (MW) motion sensor with on-off control
          *note – for option MW luminaire housing is 72 mm longer
          *note – the MW sensor is positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
PIR – Integrated PIR sensor with on-off control
PIR DALI – Integrated PIR sensor with power supply and DALI driver
PIR KRBLT DALI – Integrated wireless PIR sensor with power supply and DALI driver for KR system controls
          *note – for option PIR luminaire housing is 72 mm longer
          *note – PIR sensor is positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
          *note – PIR option is not applicable for lengths under 800 mm
          *note – ingress protection IP40
EM3 – Emergency version 3 hours
EM3A – Emergency version equipped with an autonomous testing system, 3 hours
EM3D – Emergency version 3 hours with DALI interface
          *note – EM options applicable for models longer than 1000 mm
          *note – EM+PIR +DALI+LL options are not applicable with models: K321…K324
          *note – ask for EM+PIR+DALI+L options compatibility with models: K321…K324
1LIN – Through wiring single phase d=1.5 mm² with two push-in terminal blocks
2LIN – Through wiring two phases d=1.5 mm² with two push-in terminal blocks
3LIN – Through wiring three phases d=1.5 mm² with two push-in terminal blocks
          *note – LIN options applicable for models longer than 800 mm, for shorter models 5TB option
CBF3-2.0m clear – Cable 3×0.75 mm² for suspended luminaire up to 2.0 meters, transparent
L – for in-line connection end/first luminaire (lengths: 1138/ 1418/ 2258/ 2818 mm)
LL – for in-line connection intermediate luminaire (lengths: 1119/ 1399/ 2239/ 2799 mm)
          *note – for L and LL models joint kit and 1LIN option included (5TB option for lengths up to 800 mm)
RAL9006S – RAL 9006S colour
RAL9005S – RAL 9005S colour
RAL – RAL colour