Decor P LED IK05 IP40 UGR

Available options:
T830 – Colour temperature 3000K, CRI 80+
T840 – Colour temperature 4000K, CRI 80+
WMC – White matt reflector with clear lens
BMC – Black matt reflector with clear lens
MGC – Metallic mirror finish reflector with clear lens
MMC – Metallic matt reflector with clear lens
WAC-L – Metallic mirror finish asymmetrical reflector with white shade and clear lens – left
WAC-R – Metallic mirror finish asymmetrical reflector with white shade and clear lens – right
BAC-L – Metallic mirror finish asymmetrical reflector with black shade and clear lens – left
BAC-R – Metallic mirror finish asymmetrical reflector with black shade and clear lens – right
          *note – module quantities per model: K170…K173 – 4, K174…K177 – 5, K178…K181 – 8, K182…K185 – 10
DALI – Driver with DALI interface and switch-control dimming
          *note – for DALI LIN option wires are 2×0.5 mm²
EAIRB-M – Integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control
          *note – ingress protection IP20
          *note – For option EAIRB luminaire housing is 72 mm longer
          *note – the EAIRB sensor are positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
          *note – EAIRB option is not applicable for model: K177
EAIRB-S – Slave luminaire with integrated EAIR type driver for lighting control
          *note – max system size 1x EAIRB-M + 3x EAIRB-S
          *note – max wire length from EAIRB-M to last EAIRB-S – 11 meters
BLT – Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth)
COR – Driver with Corridor function (never off)
COR1min – Driver with Corridor function 1 min (switch off after 1 min)
COR30min – Driver with Corridor function 30 min (switch off after 30 min)
KRBLT – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), on/off
KRBLT DALI – Integrated wireless control unit and driver for lighting control via mobile device (KR system app), DALI with integrated PS
PULL – Pull switch device, on/off
PULLDIM – Pull switch device and driver with switch-control dimming
          *note – For PULL and PULLDIM option luminaire housing is 50 mm longer and switch is positioned at the end of luminaire
MW – Integrated microwave (MW) motion sensor with on-off control
          *note – for option MW luminaire housing is 72 mm longer
          *note – MW sensor is positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
PIR – Integrated PIR sensor with on-off control
PIR DALI – Integrated PIR sensor with power supply and DALI driver
PIR BLT DALI – Integrated wireless PIR sensor with CASAMBI app control and DALI driver. Requires DALI power supply in the system
PIR KRBLT DALI – Integrated wireless PIR sensor with power supply and DALI driver for KR system controls
          *note – for option PIR luminaire housing is 72 mm longer
          *note – PIR sensor is positioned in the end of the luminaire for lengths up to 1800 mm, and in the middle of the luminaire for lengths over 1800 mm
EM3 – Emergency version 3 hours
EM3A – Emergency version equipped with an autonomous testing system, 3 hours
EM3D – Emergency version 3 hours with DALI interface
          *note – EM options applicable for models longer than 1000 mm
          *note – EM+PIR +DALI+LL options are not applicable for models: K170…K173
          *note – ask for EM+PIR+DALI+L options compatibility with models: K170…K173
1LIN – Through wiring single phase d=1.5 mm² with two push-in terminal blocks
2LIN – Through wiring two phases d=1.5 mm² with two push-in terminal blocks
3LIN – Through wiring three phases d=1.5 mm² with two push-in terminal blocks
          *note – LIN options applicable for models longer than 800 mm
CBF3-2.0m clear – Cable 3×0.75 mm² for suspended luminaire up to 2.0 meters, transparent
          *note – for suspended luminaires it is recommended to use one of CBF option for easier mounting
L – for in-line connection end/first luminaire
LL – for in-line connection intermediate luminaire
I-join L – Luminaire designed to in-line connection with join element – end/first luminaire (joint element not included)
I-join LL – Luminaire designed to in-line connection with join element – intermediate luminaire (joint element not included)
L I-join LL – Luminaire designed for in-line connection with join element and intermediate luminaire (joint element not included)
          *note – for I-join L and I-join LL models joint kit not included, 1LIN option included (5TB option for lengths up to 800 mm)
SUS – Suspended version
RAL9003S – RAL 9003S colour
RAL9005S – RAL 9005S colour
RAL – RAL colour

Accessories:
CAP cable 3×0.75 2.0m clear – Cable 3×0.75 mm² for suspended luminaire up to 2.0 meters, transparent
CAP cable clip D6.3mm SET clear – Cable and suspension wire clip set, 4 pcs. For cable diameter up to 6,3 mm and wire diameter 1 mm
Suspension MTG KIT SUSI – Suspension wire set “I” type, 1.5 m adjustable, 1 pcs
          *note – 2 pcs MTG SUSI KIT for length up to 2000 mm, 3 pcs MTG SUSI KIT for lengths 2000 – 3000 mm
          *note – SUS option is required 
WALL MTG KIT – Decor LED RAL9006S – Support bracket for Decor LED luminaire installation onto the wall, 1 pcs
          *note – 2 pcs WALL MTG KIT – Decor LED elements for length up to 2000 mm, 3 pcs for lengths 2000 – 3000 mm required
CAP4, white/ light grey/ black – Square decorative metal cap for hiding cable inlet with suspension wire attachment point, push-in terminals 3x1x1.5 mm², white/ light grey/ black
CAP5, white/ light grey/ black – Square decorative metal cap for hiding cable inlet with suspension wire attachment point, push-in terminals 5x1x1.5 mm², white/ light grey/ black
I-JOIN MTG KIT Decor LED RAL9006S – “I” type join kit for connecting luminaires in-line
          *note – check RAL colour to match luminaire
          *note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position
L-JOIN MTG KIT Decor LED RAL9006S – “L” type join kit for connecting luminaires in-line
          *note – check RAL colour to match luminaire
          *note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position
T-JOIN MTG KIT Decor LED RAL9006S – “T” type join kit for connecting luminaires in-line
          *note – check RAL colour to match luminaire
          *note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position
X-JOIN MTG KIT Decor LED RAL9006S – “X” type join kit for connecting luminaires in-line
          *note – check RAL colour to match luminaire
          *note – the luminaire must have I-JOIN L, I-JOIN LL or L I-JOIN LL options, depending on installation position